To optimize the amount of space and to decorate it, we hang shelves on the wall. Moreover, you can also find various types of such shelves in the market in varied colors and shapes. However, if you fail to find the right choice of shelves in the market, you may also look for them at the online retail sites as well. Furthermore, if you wish to save some extra bucks, then you can also make these shelves all by yourself.
But hanging wall shelves on the drywall is one of the significant challenges that we face. For installing the shelves using the drywall, you can use the various wall anchors. These wall anchors securely can hang multiple items and shelves from the walls, mainly where there are no studs. Let us have a look at the various types of wall anchors that you can use to install the Shelves Using Drywall.
Use The Plastic Wall Anchors To Install Shelves Using Drywall
›Hanging the shelves on the drywall can prove to be quite a challenging task. Moreover, if not installed properly, they come off the hooks and break. These plastic wall anchors look quite similar to the plastic screws. The only difference is that they have holes in them that hold the screw firmly.
›To install shelves using the drywall you first need to drill a hole into the wall. Now place the plastic wall anchor into the hole that you have dug into the drywall. After pushing the plastic cast firmly into the hole, insert the nail into it. Now gently tap the pin and plastic cast with a hammer. However, you must be careful not to harm your fingers while hammering the nail. Now use a screwdriver into a metal screw sheet. This will ensure that it gets firmly attached to it. Now hang the shelves carefully from the nails and adjust its alignment.
Use The Hollow Wall Anchors To Install Shelves Using Drywall
To install the shelves using the drywall, you can also put to use the hollow wall anchors as well. These hollow wall anchors are known as molly bolts because of their tiny shape. However, ensure that you hang the medium weight shelves while using these hollow bolts to prevent it from breaking off.
›Moreover you will find the hollow wall anchors both in metal and plastic form. To install the hollow wall anchors into the wall, you need to drill a hole into it. However, ensure that you dig a deep hole into the wall to secure the wall anchor. Now with the help of a screwdriver put the hollow wall anchor into it and press it firmly.
Toggle Bolts For Installing
For installing the shelves, you can also use the toggle bolts as well. The toggle wall anchors tend to be quite sturdy and hence, can easily carry heavyweights. Therefore, if you wish to install heavy shelves, then consider using the toggle wall anchors.